Accessing Scan Mode - HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual

Scan mode is a lower priority than an active connection. If you have an interactive session with a server,
that server is omitted in the scan sequence and the scan proceeds to the next server. No login error
messages display. After the interactive session is closed, the server is included in the scan sequence
again. If another user has an active connection to a server, you see that thumbnail in your scan list.

Accessing Scan mode

From main window, click Server, Sites, or Folders.
1.
Select two or more servers by clicking the servers while pressing the Shift key or the Control key. The
2.
Scan Mode button appears.
Click Scan Mode. The Scan Mode window appears.
3.
Setting scan preferences
From the thumbnail view, select Options>Preferences. The Scan Mode Preference dialog box
1.
appears.
Enter the time each thumbnail is active during the scan (10 to 60 seconds) in the View Time Per
2.
Server field.
Enter the length of time the scan stops between each server (5 to 60 seconds) in the Time Between
3.
Servers field.
Click OK to save changes or Cancel to exit without saving.
4.
Managing remote servers through the Video Session Viewer 89