HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual page 32

If no new console switches are found or if you pressed Stop during the add process, the Discover
o
Wizard was unsuccessful window appears. Click Finish to exit. You must manually add the
console switch. For more information, see "Adding a console switch without an assigned IP
address (on page 22)."
NOTE: If you are using Windows XP SP2 and are trying to discover a broad range of IP
addresses and the device you are trying to discover does not display, limit the number of TCP
threads to ten.
Select one or more console switches to add from the Console Switches Found box and then click the
5.
> button to move the selection to the Console Switches to add box. Repeat these steps for all the
console switches that you want to add.
Click Next. The Adding Console Switches window appears. A progress bar appears while new
6.
console switches are added to the list.
When all of the selected consoles have been added to the local database, the Completing the
Discover Wizard window appears. Click Finish to exit and return to the main window. The new
console switches appear in the list view.
If any console switches were not added to the local database for any reason, including if you
pressed Stop during the add process, the Discover Wizard Not All Console Switches Added page
appears. This page lists all of the console switches that you selected and the status for each. The
status is indicated if a console switch was added to the local database and if not, why the process
failed. Click Done when you are finished reviewing the list.
NOTE: If a console switch already exists in the local database with the same IP address as a
discovered console switch, then the discovered console switch is ignored and is not displayed
on the next Discover Wizard window.
Adding and discovering console switches 32