Assign access levels: Console Switch Administrator or User
o
Assign individual server access rights to a user through the User Access Level function
o
Enable the Security Lock-out feature that can lock out users if they try to enter an invalid password
o
five consecutive times (This feature enables you to configure the Security Lock-out settings, as well
as unlock any users.)
NOTE:
The Security Lock-out feature applies only to Local authentication. When LDAP
authentication is used, the lockout functionality of the directory service is used.
•
When LDAP Authentication and Access Control mode is enabled, the user names and access rights
are stored in and managed from the Active Directory.
A user can be assigned one of two access levels: Console Switch Administrator or User. The user access
level enables you to assign individual server access rights to a user. The table following indicates the
types of console switch operations that may be performed in each access level.
Operation
Preemption
Console Switch
Administrator
All
User
No
Managing KVM console switches 45