Enter a new file name in the File name field. If you enter a file name that already exists, the new
d.
file overwrites the old file.
Click Log to confirm the directory selection and begin logging.
3.
-or-
Click Cancel to exit the dialog box and cancel the request to start logging.
When logging begins, the logging status label indicates Logging.
Pausing logging
Select Options>Logging>Pause from the Serial Session Viewer. The logging status label indicates Logging
Paused.
Resuming logging
Select Options>Logging>Resume from the Serial Session Viewer. The logging status label indicates
Logging.
Stopping logging
Select Options>Logging>Stop from the Serial Session Viewer. The logging status label disappears.
Moving session data
During a Serial Session Viewer session, you can:
•
Highlight session data and copy it to the system clipboard
•
Copy a screen of session data to the system clipboard
•
Copy the entire history buffer contents to the system clipboard
•
Paste the contents of the system clipboard into a session
•
Print a screen of session data
Information that is copied from a session can be pasted in other applications. Similarly, information
copied from other applications can be pasted into a Serial Session Viewer session.
NOTE:
Copying a session data
There are three ways to copy data to the clipboard:
•
Highlight session data to be copied and press Copy Text in the toolbar or the Edit>Copy Text menu.
•
Copy the visible session screen contents by pressing Copy Screen in the toolbar or the Edit>Copy
Screen menu.
•
Copy the entire session buffer by pressing Copy Buffer in the toolbar or the Edit>Copy Buffer menu.
Only textual (ASCII) data can be copied and pasted.
Managing remote servers through the Serial Session Viewer 168