HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual page 109

Click Enable SSH. The Enable SSH dialog box appears.
a.
Select the SSH Authentication Mode from the pull-down menu.
b.
If an SSH key does not exist, the Create new key checkbox is automatically selected and a new
c.
key is created. After a new key is created, you cannot disable it.
If an SSH key exists and you want to create a new key, select the Create new key checkbox.
-or-
To use the existing key, clear the Create new key checkbox.
Click OK to close the dialog box. SSH is now enabled.
2.
Changing the SSH authentication mode
Click Modify SSH. The Modify SSH dialog box appears.
1.
Select the SSH authentication mode from the dropdown list.
2.
Click OK to close the dialog box.
3.
Managing serial console switches 109