HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual page 261

Issue Resolution
The Discover Wizard Erase the IP address in the From Address: and the To Address: fields and enter the
does not discover correct information.
console switches.
The Discover Wizard is It takes 4 seconds to scan each IP address. Enter a smaller range of IP addresses.
taking a long time to
scan a range of IP
addresses.
You get a login failure Resolve the following:
when LDAP is enabled.
•
•
•
•
You might also get this login failure when the LDAP client cannot contact any LDAP
server or DNS server.
After enabling Bootp The IP address must be statically assigned to the MAC address of the console switch.
(in the Settings The DHCP server must be enable to respond to Bootp.
Category) the Discover
Wizard does not get
an IP address or a
random IP address is
given.
The Video Session Select Tools>Automatic Video Adjust in the Video Session Viewer.
Viewer is distorted
when a serial interface
adapter is connected.
You get an "Access •
cannot be granted due
to Authentication Server
•
errors" error when
correct user name and
password is used while
using LDAP for
authentication and
authorization.
The Linux HP IP •
Console Viewer is
•
taking a while to
startup.
When connecting to You must resolve the extra line feed by entering:
the HP 16- and 48-Port
port x set out if=strip
Serial Console Switch, I
port x set flow=XonXoff
am getting an extra
line feed.
Unable to see local Local devices only able to be seen on local OSD.
USB devices remotely.
Unable to see remote Remote devices only seen on client machine.
devices on local OSD.
The search credentials (DN and password) are not valid.
An invalid authentication mode (not basic, attribute, or group) is requested.
The group container cannot be found in the directory (Group Mode only).
The target computer cannot be found (Group Mode only).
Verify that the console switch or interface adapter is named exactly the same as
in the LDAP directory.
Review the tutorial to gain a better understanding of LDAP functionality. For more
information, see "HP IP Console Switch directory services integration setup
tutorial (on page 277)."
Verify that the loopback interface is up.
Verify that the /etc/hosts contains a 127.0.0.1 localhost entry.
Troubleshooting 261