Upgrading Serial Console Switch Firmware - HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual

Click Reboot Serial Console Switch. A reboot warning appears.
2.
Click Yes.
3.
Wait 60 seconds after powering up before performing any console switch operations.

Upgrading serial console switch firmware

You can upgrade the serial console switch firmware by using TFTP or file system.
NOTE:
have not yet applied those changes before starting the upgrade, a warning message prompts
you to confirm the upgrade because the upgrade process requires that the console switch be
rebooted. If you do not apply the changes, they are discarded before upgrading the firmware.
To perform TFTP downloads, TFTP must be enabled.
CAUTION:
up to 10 minutes to complete.
Select Tools.
1.
Click Upgrade Console Switch Firmware. The Upgrade Console Switch Firmware dialog box
2.
appears.
Select TFTP Server or File System.
3.
NOTE:
If you enabled File System, enter the Firmware file name, or browse for it on the file system.
4.
-or-
If you enabled TFTP Server:
Select the Firmware Type.
a.
Enter the IP address in the TFTP Server IP address field.
b.
If you made changes in the Settings tab of the Manage Console Switch window, but
Do not power down the console switch while it is upgrading. This process can take
You must upload two firmware files, bootstrap and application.
Managing serial console switches 146