Viewing interface adapter version parameters
The Interface Adapter subcategory enables you to view and load all the interface adapters in the system.
Enabling automatic interface adapter firmware upgrades
For HP IP Console Switches with Virtual Media, you can set the console switch to upgrade the interface
adapter firmware automatically.
Select Interface Adapters.
1.
Enable the Enable Auto-Upgrade for all Interface Adapters checkbox.
2.
Click Apply, and then click OK.
3.
Manually loading and upgrading the interface adapter firmware
The interface adapter firmware can be loaded individually from the Settings tab, or it can be upgraded
simultaneously from the Tools tab
message appears, indicating the current status. When a load is in progress, you cannot initiate another.
("Using the Tools
tab" on page 71). When a load is initiated, a
Managing KVM console switches 67