Adjusting The Video Quality - HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual

Adjusting the video quality

The Video Session Viewer offers both automatic and manual video adjustment capability. In most
instances, the Automatic Video Adjustment optimizes the video for the best possible view.
The Performance Monitor provides feedback while adjusting the settings. Adjust the settings until the
Performance Monitor displays no values.
Item
1
2
3
4
5
6
7
8
To adjust the video quality of the Video Session Viewer window:
Select Tools>Manual Video Adjust. The Manual Video Adjust dialog box appears.
1.
Click the icon to be adjusted, and move the slider bar or click the Min - or Max + buttons. The
2.
adjustments are displayed immediately.
Click Close to exit.
3.
Description
Image Capture Width–Adjusts the screen image width
Pixel Sampling Fine Adjust–Adjusts the screen image
pixel sharpness
Image Capture Horizontal Position–Adjusts the screen
image position left or right
Image Capture Vertical Position–Adjusts the screen
image vertical position up or down
Contrast–Increases or decreases screen image lightness
or darkness
Brightness–Increases or decreases screen image intensity
Noise Threshold–Adjusts the number of pixels in a block
for which a change must be detected for the video data
to be sent to the client
Priority Threshold–Adjusts the level of changes within a
video black to determine what would be sufficient to
cause a video block to be marked as high priority
Managing remote servers through the Video Session Viewer 86