HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual page 275

F—Hardware Flow Control: No
G—Software Flow Control: No
Press the Enter key to return to the Confirmation menu. Scroll down to the Save setup as dfl
g.
option, and press the Enter key.
Scroll down the Configuration menu to the Exit from Minicom option, and press the Enter key.
h.
From the Linux command prompt, enter minicom. As soon as a connection is established, the
i.
Main menu for the console switch appears. Follow the on-screen options to configure the console
switch. The Main Menu with six options appears.
Plug the supplied power cord into the rear of the console switch and then into a valid power source,
4.
if not already connected.
Power on the console switch, if not already powered on. The activity indicator on the rear panel
5.
powers on. The activity indicator blinks for 30 seconds while performing a self-test. Approximately
10 seconds after it stops blinking, press the Enter key to access the main menu.
Upgrading the firmware 275