Override Admin - HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual

Specifying a security lock-out duration
Select Users.
1.
Select Enable Lock-outs.
2.
Enter the number of hours that a user is locked out (1 to 99) in the Duration field.
3.
Click Apply, and then click OK.
4.

Override Admin

Override Admin is the one account that can be used to get into the console switch from a network, even if
the local accounts are locked or do not exist or if LDAP is not working properly. The Override Admin
account is a permanent account that cannot be deleted. It has the same access right privileges as a
Console Switch Administrator. The ID and password should be closely held by authorities and should not
be used as Admin or User accounts on a day-to-day basis. The Override Admin account name and
password settings are accessible only to the Override Admin user. The Override Admin account
authenticates only locally to the console switch and the directory.
NOTE:
version before 3.0.0, the upgrade procedure searches for an existing Console Switch Admin
account named "Admin" and migrates this user name and password to be the default Override
Admin account. If the user "Admin" is not found, then the default Override Admin user name
will be "Admin" and the default password will not be set (empty).
For 1 x 1 x16 and 3 x 1 x16 IP console switches when upgrading from a firmware
Managing KVM console switches 52