Adding and discovering console switches
Adding console switches
Before a console switch can be accessed through the HP IP Console Viewer, you must add it to the HP IP
Console Viewer database. After the console switch has been manually added or discovered, it appears in
the list view.
If an IP address has already been assigned to the console switch, the HP IP Console Viewer automatically
discovers it by searching for an exact IP address or an address range. If an IP address has not yet been
assigned, you must manually add the console switch. If you are installing multiple console switches, HP
recommends using the Discover Wizard. If you are installing a single console switch, HP recommends
using the New Console Switch Wizard.
NOTE:
in the console switch OSD before adding them to the HP IP Console Viewer. For serial console
switches, the server name should be configured on the associated serial console switch port
using the CLI. For more information, refer to the documentation included with the serial console
switch.
Adding a console switch without an assigned IP address
Select File>New>Console Switch, or click New Console Switch.
1.
For KVM console switches, HP recommends that you assign names to the target servers
Adding and discovering console switches 22