HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual page 107

Either plaintext sessions or SSH (or both) must be enabled to launch the Serial Session Viewer. Failure to
have either or both enabled will result in an invalid configuration. Plaintext sessions are enabled by
default.
Specifying a history buffer control
Select Sessions.
1.
In the History Buffer Control area, select Auto or Hold for the Session Start action. Select Keep or
2.
Clear for the Session End action.
Click Apply to save any changes without exiting.
3.
-or-
Click OK to save any changes and exit.
-or-
Click Cancel to exit without saving any changes.
Managing serial console switches 107