If AC power is used, use a single-phase three-wire power receptacle with protection earth (PE) to
•
filter interference from the power grid.
Keep the switch far away from radio transmitting stations, radar stations, and high-frequency
•
devices.
•
Use electromagnetic shielding, for example, shielded interface cables, when necessary.
Route interface cables only indoors to prevent signal ports from getting damaged by overvoltage or
•
overcurrent caused by lightning strikes.
Laser safety
WARNING!
Do not stare into any fiber port when the switch has power. The laser light emitted from the optical fiber
might hurt your eyes.
The HP 5130 EI switches are Class 1 laser devices.
Installation tools
Flat-blade screwdriver
•
Phillips screwdriver
•
•
ESD wrist strap
All these installation tools are user supplied.
Installation accessories
Table 3 Installation accessories
Product code
5066-0850
Description
1 U four-hole mounting bracket kit
(including one pair of mounting
brackets and eight M4
countersunk screws)
Quantity
Applicable models
•
•
•
•
1 kit
•
•
•
•
6
HP 5130-24G-PoE+-4SFP+
(370W) EI
HP 5130-24G-PoE+-4SFP+
(370W) EI TAA
HP 5130-48G-4SFP+ EI
HP 5130-48G-4SFP+ EI TAA
HP 5130-48G-PoE+-4SFP+
(370W) EI
HP 5130-48G-PoE+-4SFP+
(370W) EI TAA
HP 5130-24G-SFP-4SFP+ EI
HP 5130-24G-SFP-4SFP+ EI TAA