Select an individual server from the selected view.
1.
Select View>Properties from the menu bar. The General tab appears.
2.
-or-
Click Properties. The General tab appears.
-or-
Highlight and right-click the server, and select Properties. The General tab appears.
Click Connections to view the connection path.
3.
Click Apply>OK to save the new settings.
4.
-or-
Click Cancel to exit.
If a server is connected directly into a serial console switch or an expansion module, then the connection
sequence is as follows: connection type (Video or Serial), console switch name with IP address in
parentheses, serial port number, and the server name.
VNC tab
Selecting Tools>Options VNC enables you to configure the default VNC properties.
Organizing the system 185