HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual page 186

When you indicate a user-specified VNC application to launch, you can include its command line
arguments. A selection of macros is available for placement in the command line. This might be useful for
automatic replacement of variables such as IP address, port number, user name, and password. For VNC
commands that do not provide their own GUI, such as those for standard Windows®, Linux, and UNIX®,
you can have the VNC application launch from within an operating system command window.
Viewing and changing VNC options
Select an individual unit from the selected view.
1.
Select View>Properties from the menu bar. The General tab appears.
2.
-or-
Click Properties. The General tab appears.
-or-
Highlight and right-click the unit, and select Properties. The General tab appears.
Click VNC.
3.
For servers only, in the IP Address field, enter a valid IP address or a 1 to 128-character domain
4.
name. Spaces are not allowed. Duplicate addresses are allowed.
For servers only, in the Port field, enter a port number in the range 23 to 65535. If the field is left
5.
blank, port 23 is used. For serial console switches, the console switch's IP address is used along with
default CLI telnet port 23.
Organizing the system 186