Installing And Removing Memory - Intel NUC 7 User Manual

User Guide for NUC7CJYH, NUC7PJYH
This guide tells you how to:
Install and remove memory
•
Install a 2.5" drive
•
Install a VESA mount bracket
•
Connect power
•
Install an operating system
•
Install the latest device drivers and software
•
Open the Intel NUC Chassis
To open the Intel NUC chassis, follow these steps:
1. With a screwdriver unscrew the four corner screws on the bottom cover of the chassis and lift the
cover.

Installing and Removing Memory

Intel NUC Kits NUC7CJYH and NUC7PJYH have two 260-pin DDR4 SO-DIMM sockets. Be sure to select
memory modules that meet these requirements:
• 1.2V low voltage memory
•
2400 MHz SO-DIMMs
• Non-ECC
Find compatible memory modules in the
• NUC7CJYH
• NUC7PJYH
3
®
Intel Product Compatibility Tool
: