Hot-Swap SAS/SATA Backplane
The Hot-Swap SAS/SATA backplane serves as an interface between the mother board and the
system drives. The following diagrams show the location for each connector found on
the backplane.
12 x 3.5-inch Hard Drive Backplane
Figure 10. 12 x 3.5-inch Hard Drive Backplane Components (Front View)
A
B
C
D
E
F
G
H
I
J
K
L
M
®
Intel
Server Chassis H2000 Family Service Guide
A
SATA/SAS connectors for Node 1
B
SATA/SAS connectors for Node 2
C
SATA/SAS connectors for Node 3
SATA/SAS connectors for Node 4
D
20-pin Front Panel cable connector for Node 2, 4
2Blade Compute Node Power connector for Node 4
2x40 pin Bridge Board connector for Node 4
2x9 pin Power supply input connector
2x9 pin Power supply input connector
2x7 pin Power Control cable connector
2Blade Compute Node Power connector for Node 3
2x40 pin Bridge Board connector for Node 3
2x40 pin Bridge Board connector for Node 1
20-pin Front Panel cable connector for Node 1, 3
2Blade Compute Node Power connector for Node 1
2x9 pin Power supply input connector
2x9 pin Power supply input connector
Server System Features
5