Chapter 6: Vpn; Viewing Ipsec Vpn Status - Cisco RV315W Administration Manual

VPN

Viewing IPSec VPN Status

STEP 1
Cisco RV315W Broadband Wireless VPN Router Administration Guide
The RV315W supports the IPsec VPN feature to set up a single gateway-to-
gateway VPN tunnel or a client-to-gateway VPN tunnel. In this configuration, the
RV315W creates a secure VPN connection to another VPN-enabled router or a
remote PC that installs third-party VPN client software. For example, you can
configure the RV315W at a branch site to connect to the VPN router at the
corporate site so that the branch site can securely access the corporate network.
This chapter describes how to configure IPsec Virtual Private Networks (VPNs)
that allow remote workers to access your network resources. It includes the
following sections:
• Viewing IPSec VPN Status
• Configuring IPsec VPN Policies
The IPsec VPN page allows you to view the status of all IPsec VPN connections of
the RV315W.
To view information for an IPsec VPN connection:
Click VPN > IPsec VPN. The IPsec VPN page opens.
The IPsec Connections table lists all existing IPsec VPN policies specified on the
RV315W. The following fields are displayed:
• Connection Name: Displays the name of the IPsec VPN policy.
• Enable: Displays whether the IPsec VPN policy is enabled or disabled.
• Interface: Displays the interface used for the IPsec VPN policy.
• Connection Type: Displays the type of VPN connection, such as site-to-site
or pc-to-site.
6
66