Adding Or Editing Ike Policies - Cisco RV215W Administration Manual

Configuring VPN
Configuring Advanced VPN Parameters
STEP 1
STEP 2
STEP 3
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Draft Version 1—Cisco Confidential
Choose VPN > IPsec > Advanced VPN Setup.
In the VPN Policy Table, checking the box in the VPN connection row allows you to
perform the following tasks:
• Edit—Edit properties of the VPN policy. See
Policies.
• Enable—Enable the policy.
• Disable—Disable the policy.
• Delete—Delete the policy.
• Add Row—Add a VPN policy. See
you have a VPN connection already configured, you cannot add another
without deleting the existing VPN connection.)
Click Save.

Adding or Editing IKE Policies

When adding or editing IKE policies, configure the following settings:
• Policy Name—Enter a unique name for the policy for identification and
management purposes.
• Exchange Mode—Choose one of the following options:
- Main—This mode negotiates the tunnel with higher security, but is
slower.
- Aggressive—This mode establishes a faster connection, but with
lowered security.
Adding or Editing VPN
Adding or Editing VPN
5
Policies. (Note: If
94