Default Settings - Cisco N5010P-N2K-BE Software Configuration Manual

Chapter 33 Configuring Domain Parameters
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
switch# show fcdomain fcid persistent vsan 1000
The following example shows how to display frame and other fcdomain statistics for a specified VSAN
or SAN port channel:
switch# show fcdomain statistics vsan 1
VSAN Statistics
The following example shows how to display FC ID allocation statistics including a list of assigned and
free FC IDs:
switch# show fcdomain address-allocation vsan 1
The following example shows how to display the valid address allocation cache. The cache is used by
the principal switch to reassign the FC IDs for a device (disk or host) that exited and reentered the fabric.
In the cache content, VSAN refers to the VSAN that contains the device, WWN refers to the device that
owned the FC IDs, and mask refers to a single or entire area of FC IDs.
switch# show fcdomain address-allocation cache

Default Settings

Table 33-2
Table 33-2
Parameters
fcdomain feature
Configured domain ID
Configured domain
auto-reconfigure option
contiguous-allocation option
Priority
Allowed list
Fabric name
rcf-reject
Persistent FC ID
Allowed domain ID list configuration distribution Disabled
OL-16597-01
Number of Principal Switch Selections: 5
Number of times Local Switch was Principal: 0
Number of 'Build Fabric's: 3
Number of 'Fabric Reconfigurations': 0
lists the default settings for all fcdomain parameters.
Default fcdomain Parameters
Default
Enabled
0 (zero)
Preferred
Disabled
Disabled
128
1 to 239
20:01:00:05:30:00:28:df
Disabled
Enabled
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Default Settings
33-19