Testing Call Home Communications; Verifying Call Home Configuration - Cisco N5010P-N2K-BE Software Configuration Manual

Chapter 26 Configuring Smart Call Home
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
To discard Call Home configuration changes and release the CFS lock in callhome configuration mode,
perform this task:
Command
switch(config-callhome)# abort

Testing Call Home Communications

You can generate a test message to test your Call Home communications.
To generate a test Call Home message, perform this task:
Command
switch(config-callhome)# callhome send
diagnostic
switch(config-callhome)# callhome test

Verifying Call Home Configuration

To display Call Home configuration information, perform one of the following tasks:
Command
show callhome
show callhome destination-profile name
show callhome merge
show callhome pending
show callhome pending-diff
show callhome session
show callhome status
show callhome transport-email
show callhome user-def-cmds
OL-16597-01
Purpose
Discards Call Home configuration changes and
releases the CFS lock. Use this command if you
are the CFS lock owner or if you are logged into
the device that holds the CFS lock
Purpose
Sends the specified Call Home test message to all
configured destinations.
Sends a test message to all configured
destinations.
callhome test and callhome test inventory
commands are supported.
Purpose
Displays the status for Call Home.
Displays one or more Call Home destination
profiles.
Displays the status of the last CFS merge for Call
Home.
Displays the Call Home configuration changes in
the pending CFS database.
Displays the differences between the pending and
running Call Home configuration.
Displays the status of the last Call Home CFS
command.
Displays the Call Home status.
Displays the e-mail configuration for Call Home.
Displays CLI commands added to any alert
groups.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Verifying Call Home Configuration
26-13