Cisco N5010P-N2K-BE Software Configuration Manual page 69

Chapter 3 Configuring the Switch
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
switch# dir bootflash:
13176836
20058112
20217856
76930262
103484727
Usage for bootflash://sup-local
74934272 bytes used
5550080 bytes free
80484352 bytes total
Tip
If you need more space on the active supervisor module bootflash, delete unnecessary files to make space
Step 8
available.
switch# delete bootflash:n5000-uk9-kickstart.4.0.0.N1.2.474.bin
switch# delete bootflash:n5000-uk9.4.0.0.N1.2.474.bin
Copy the kickstart and system images to the supervisor module bootflash using a transfer protocol. You
Step 9
can use ftp:, tftp:, scp:, or sftp:. The examples in this procedure use scp:.
switch# copy
scp://user@scpserver.cisco.com//downloads/n5000-uk9-kickstart.4.0.1a.N2.0.140.bin
bootflash:n5000-uk9-kickstart.4.0.1a.N2.0.140.bin
switch# copy scp://user@scpserver.cisco.com//downloads/n5000-uk9.4.0.1a.N2.0.140.bin
bootflash:n5000-uk9.4.0.1a.N2.0.140.bin
Install the new images, specifying the new image names that you downloaded in step 9.
Step 10
switch(config)# install all kickstart bootflash:n5000-uk9-kickstart.4.0.1a.N2.0.140.bin
system bootflash:n5000-uk9.4.0.1a.N2.0.140.bin
The install command performs the following actions:
performs compatibility checks (equivalent to the show incompatibility command) for the images
•
that you have specified. If there are compatibility issues, an error message is displayed and the
installation does not proceed.
Displays the compatibility check results and displays whether the installation is disruptive.
•
Provides a prompt to allow you to continue or abort the installation.
•
Note
Updates the boot variables to reference the specified images and saves the configuration to the
•
startup configuration file.
After the switch completes the installation, log in and verify that the switch is running the required
Step 11
software version.
switch# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2009, Cisco Systems, Inc. All rights reserved.
OL-16597-01
4681 Nov 24 02:43:52 2008
Nov 24 07:19:36 2008
49152 Jan 12 18:38:36 2009
310556 Dec 23 02:53:28 2008
Nov 07 02:35:22 2008
Jan 12 18:26:54 2009
Nov 07 02:35:22 2008
Jan 12 18:29:08 2009
We recommend that you keep the kickstart and system image files for at least one previous
software release to use if the new image files do not load successfully.
A disruptive installation causes traffic disruption while the switch reboots.
config
gdb.1
lost+found/
n1
n5000-uk9-kickstart.4.0.0.N1.2.474.bin
n5000-uk9-kickstart.4.0.1a.N2.0.140.bin
n5000-uk9.4.0.0.N1.2.474.bin
n5000-uk9.4.0.1a.N2.0.140.bin
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Upgrading the Switch
3-5