Clearing Fspf Counters For An Interface; Fspf Routes; About Fibre Channel Routes - Cisco N5010P-N2K-BE Software Configuration Manual

Chapter 40 Configuring Fibre Channel Routing Services and Protocols
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

Clearing FSPF Counters for an Interface

To clear the FSPF statistics counters for an interface, perform this task:
Command
switch# clear fspf counters vsan vsan-id
interface fc slot/port

FSPF Routes

FSPF routes traffic across the fabric, based on entries in the FSPF database. These routes can be learned
dynamically, or configured statically.
This section includes the following topics:
•
•

About Fibre Channel Routes

Each port implements forwarding logic, which forwards frames based on its FC ID. Using the FC ID for
the specified interface and domain, you can configure the specified route (for example, FC ID 111211
and domain ID 3) in the switch with domain ID 1 (see
Figure 40-3
Domain ID 1
OL-16597-01
About Fibre Channel Routes, page 40-9
Configuring Fibre Channel Routes, page 40-10
Fibre Channel Routes
fc1/1
Domain ID 3
FC ID 111211
Purpose
Clears the FSPF statistics counters for the specified
interface in the specified VSAN.
Figure 40-3).
Domain ID 7
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
FSPF Routes
40-9