Cisco N5010P-N2K-BE Software Configuration Manual page 452

Verifying Fibre Channel Interfaces
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
The following example shows how to display multiple specified interfaces:
switch# show interface fc3/1 , fc3/3
fc3/1 is up
...
fc3/3 is up
...
The following example shows how to display a specific interface:
switch# show interface vfc 1
vfc 1 is up
...
The following example shows how to display interface descriptions:
switch# show interface description
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
fc3/1
Ethernet1/1
vfc 1
...
The following example shows how to display all interfaces in brief:
switch# show interface brief
The following example shows how to display interface counters:
switch# show interface counters
The following example shows how to display transceiver information for a specific interface:
switch# show interface fc3/1 transceiver
The show interface transceiver command is only valid if the SFP is present.
Note
The show running-configuration command displays the entire running configuration with information
for all interfaces. The interfaces have multiple entries in the configuration files to ensure that the
interface configuration commands execute in the correct order when the switch reloads. If you display
the running configuration for a specific interface, all the configuration commands for that interface are
grouped together.
The following example shows the interface display when showing the running configuration for all
interfaces:
switch# show running configuration
...
interface fc3/5
switchport speed 2000
...
interface fc3/5
switchport mode E
...
interface fc3/5
channel-group 11 force
no shutdown
The following example shows the interface display when showing the running configuration for a
specific interface:
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
32-16
Description
test intest
--
--
Chapter 32 Configuring Fibre Channel Interfaces
OL-16597-01