Cloning Zones, Zone Sets, Fc Aliases, And Zone Attribute Groups; Clearing The Zone Server Database - Cisco N5010P-N2K-BE Software Configuration Manual

Chapter 38 Configuring and Managing Zones
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Command
Step 2
switch(config)# zoneset rename oldname
newname vsan vsan-id
switch(config)# zone rename oldname
newname vsan vsan-id
switch(config)# fcalias rename oldname
newname vsan vsan-id
switch(config)# zone-attribute-group
rename oldname newname vsan vsan-id
Step 3
switch(config)# zoneset activate name
newname vsan vsan-id

Cloning Zones, Zone Sets, FC Aliases, and Zone Attribute Groups

To clone a zone, zone set, fcalias, or zone-attribute-group, perform this task:
Command
Step 1
switch# configuration terminal
Step 2
switch(config)# zoneset clone oldname
newname vsan vsan-id
switch(config)# zone clone oldname
newname vsan number
switch(config)# fcalias clone oldname
newname vsan vsan-id
switch(config)# zone-attribute-group
clone oldname newname vsan vsan-id
Step 3
switch(config)# zoneset activate name
newname vsan vsan-id

Clearing the Zone Server Database

You can clear all configured information in the zone server database for the specified VSAN.
To clear the zone server database, use the following command:
switch# clear zone database vsan 2
After entering a clear zone database command, you must explicitly enter the copy running-config
Note
startup-config to ensure that the running configuration is used when the switch reboots.
Clearing a zone set only erases the full zone database, not the active zone database.
Note
OL-16597-01
Purpose
Renames a zone set in the specified VSAN.
Renames a zone in the specified VSAN.
Renames a fcalias in the specified VSAN.
Renames a zone attribute group in the specified
VSAN.
Activates the zone set and updates the new zone name
in the active zone set.
Purpose
Enters configuration mode.
Clones a zone set in the specified VSAN.
Clones a zone in the specified VSAN.
Clones a fcalias in the specified VSAN.
Clones a zone attribute group in the specified VSAN.
Activates the zone set and updates the new zone name
in the active zone set.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Zone Set Duplication
38-17