Cisco N5010P-N2K-BE Software Configuration Manual page 323

Chapter 21 Using Cisco Fabric Services
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Creating CFS Regions
To create a CFS region, perform this task:
Command
Step 1
switch# configure
Step 2
switch(config)# cfs region region-id
Assigning Applications to CFS Regions
To assign an application on a switch to a region, perform this task:
Command
Step 1
switch# configure
Step 2
switch(config)# cfs region region-id
Step 3
switch(config-cfs-region)# ntp
switch(config-cfs-region)# callhome
Moving an Application to a Different CFS Region
To move an application for example, from Region 1 (originating region) with NTP and Call Home
applications assigned to it, to Region 2 (target region), perform this task:
Command
Step 1
switch# configure
Step 2
switch(config)# cfs region region-id
Step 3
switch(config-cfs-region)# ntp
switch(config-cfs-region)# callhome
Note If you try adding an application to the same region more than once, you see the error message,
"Application already present in the same region."
Removing an Application from a Region
Removing an application from a region is the same as moving the application back to the default region
or to Region 0, that is, bringing the entire network into the scope of distribution for the application.
To remove applications from a region, perform this task:
Command
Step 1
switch# configure
switch(config)#
Step 2
switch(config)# cfs region region-id
Step 3
switch(config-cfs-region)# no ntp
switch(config-cfs-region)# no callhome
OL-16597-01
Purpose
Enters configuration mode.
Creates a region.
Purpose
Enters configuration mode.
Creates a region.
Adds application(s).
Purpose
Enters configuration mode.
Enters CFS region configuration submode.
Indicates application(s) to be moved into Region 2
that originally belong to Region 1. In this example,
the NTP and Call Home applications are moved to
Region 2.
Purpose
Enters configuration mode.
Enters CFS region configuration submode.
Removes application(s) that belong to the region.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
CFS Regions
21-11