Default Settings; Getting To Know The Cisco Srp520-U Series Services Ready Platforms; Model Numbers - Cisco Small Business SRP520-U Quick Start Manual

Default Settings

These are the default settings used when configuring your SRP for the first
time. See Getting Started with Device Configuration, page
Parameter
Device IP
Username
Password
DHCP Range
If you obtained your SRP from your Service Provider, you may not
N
OTE
have access to the Administrator account. If this is the case, please
contact your Service Provider for more information.
Getting to Know the Cisco SRP520-U Series
2
Services Ready Platforms

Model Numbers

Model Description
SRP521W-U Fast Ethernet WAN
2 Phone (FXS) ports, 1 Line (FXO) port, 1 WAN (10/100) port,
4 LAN (10/100) ports, 1 USB 2.0 port, 802. 1 1b/g/n, and WiFi
Protected Setup (WPS)
SRP526W-U ADSL2+ Annex B (ADSL over ISDN)
2 Phone (FXS) ports, 1 Line (FXO) port, 1 DSL port,
4 LAN (10/100) ports, 1 USB 2.0 port, 802. 1 1b/g/n, and WiFi
Protected Setup (WPS)
SRP527W-U ADSL2+ Annex A/M (ADSL over POTS)
2 Phone (FXS) ports, 1 Line (FXO) port, 1 DSL port,
4 LAN (10/100) ports, 1 USB 2.0 port, 802. 1 1b/g/n, and WiFi
Protected Setup (WPS)
Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models)
Value
192. 1 68. 1 5. 1
admin
admin
192. 1 68. 1 5. 1 00 to 149
12.
3