Cisco N5010P-N2K-BE Software Configuration Manual page 620

Configuring Port Security
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
See the
auto-learning enabled.
Step 5 Wait until all switches and all hosts are automatically learned.
Disable auto-learn on each VSAN.
Step 6
See
Issue a CFS commit to copy this configuration to all switches in the fabric.
Step 7
See the
are combined into a static active database that is distributed to all switches.
Copy the active database to the configure database on each VSAN.
Step 8
See the
Issue a CFS commit to copy this configuration to all switches in the fabric.
Step 9
See the
the same on all switches in the fabric.
Copy the running configuration to the startup configuration, using the fabric option.
Step 10
This step saves the port security configure database to the startup configuration on all switches in the
fabric.
Configuring Port Security with Auto-Learning without CFS
To configure port security using auto-learning without CFS, perform this task:
Enable port security.
Step 1
See the
Step 2 Activate port security on each VSAN, which turns on auto-learning by default.
See the
Wait until all switches and all hosts are automatically learned.
Step 3
Disable auto-learn on each VSAN.
Step 4
See the
Copy the active database to the configure database on each VSAN.
Step 5
See the
Copy the running configuration to the startup configuration, which saves the port security configuration
Step 6
database to the startup configuration.
Repeat
Step 7
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
45-4
"Committing the Changes" section on page
the"Disabling Auto-Learning" section on page
"Committing the Changes" section on page
"Copying the Port Security Database" section on page
"Committing the Changes" section on page
"Enabling Port Security" section on page
"Activating Port Security" section on page
"Disabling Auto-Learning" section on page
"Copying the Port Security Database" section on page
Step 1 through Step 6 for all switches in the fabric.
Chapter 45
45-13. All switches have port security activated with
45-8.
45-13. The auto-learned entries from every switch
45-17.
45-13. This ensures that the configure database is
45-5.
45-6.
45-8.
45-17.
Configuring Port Security
OL-16597-01