Cisco N5010P-N2K-BE Software Configuration Manual page 361

Chapter 26 Configuring Smart Call Home
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
destination profile only if that Call Home alert belongs to one of the alert groups associated with that
destination profile and if the alert has a Call Home message severity at or above the message severity set
in the destination profile (see the
Table 26-1
messages generated for the alert group.
Table 26-1
Alert Group
Cisco-TAC
Diagnostic
Supervisor
hardware
Linecard hardware
Configuration
System
Environmental
Inventory
OL-16597-01
"Call Home Message Levels" section on page
lists supported alert groups and the default CLI command output included in Call Home
Alert Groups and Executed Commands
Description
All critical alerts from the other alert groups
destined for Smart Call Home.
Events generated by diagnostics.
Events related to supervisor modules.
Events related to standard or intelligent
switching modules.
Periodic events related to configuration.
Events generated by failure of a software
system that is critical to unit operation.
Events related to power, fan, and
environment-sensing elements such as
temperature alarms.
Inventory status that is provided whenever a
unit is cold booted, or when FRUs are
inserted or removed. This alert is
considered a noncritical event, and the
information is used for status and
entitlement.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Information About Call Home
26-4).
Executed Commands
Execute commands based on the
alert group that originates the alert.
show diagnostic result module all
detail
show module
show version
show tech-support platform
callhome
show diagnostic result module all
detail
show module
show version
show tech-support platform
callhome
show diagnostic result module all
detail
show module
show version
show tech-support platform
callhome
show version
show module
show running-config all
show startup-config
show system redundancy status
show tech-support
show environment
show logging last 1000
show module
show version
show tech-support platform
callhome
show module
show version
show license usage
show inventory
show sprom all
show system uptime
26-3