Chapter 51 Configuration Limits - Cisco N5010P-N2K-BE Software Configuration Manual

S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Table 51-1 Configuration Limits (continued)
Feature
Zone members per physical fabric
(includes all VSANs)
Zones per switch (includes all VSANs)
Maximum diameter of a SAN Fabric
FSPF interface instances per switch
ISL instances per switch
Virtual interfaces
QoS System Classes
VLAN ACL (VACL) entries for the whole
switch
Port ACL (PACL) entries per physical
Ethernet interface
ACL Accounting
Fibre Channel Flows
EtherChannels and SAN port channels
6
SPAN Sessions
Egress SPAN sources
1. The entire 4094 VLAN ID space is supported.
2. Station table contains all unicast Ethernet MAC addresses and Ethernet multicast addresses.
3. The entire 4094 VSAN ID space is supported.
4. Requires two N5K-M1008 expansion modules.
5. This is the number of Extended ISLs (16) times the number of VSANs (256).
6. Only one SPAN session is supported for all the host interfaces on the same Fabric Extender. A Fabric Extender host interface cannot be configured as a
SPAN destination.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
51-2
Verified Limit
8,000
8,000
3 hops
256
256
52 virtual Fibre Channel interfaces
5 user-configurable classes
1,024
128
32
32
4 SAN port channels and 12
EtherChannels
2 active sessions
2
Chapter 51 Configuration Limits
Maximum Limit
20,000
8,000
12 hops
5
4,096
256 (up to 8 Fibre Channel interfaces,
each with up to 32 VSAN instances)
52 virtual Fibre Channel interfaces
5 user-configurable classes
1,024
128
32
32
16 port channels (any combination of
SAN port channels and EtherChannels)
18 sessions configured (2 active)
2
OL-16597-01