Default Settings - Cisco RV315W Administration Manual

Getting Started
Product Overview
NOTE
Cisco RV315W Broadband Wireless VPN Router Administration Guide
LAN1-8 Ports
RESET
POWER (12VDC)
Power Switch

Default Settings

These are the default settings used when configuring your RV315W for the first
time.
Parameter
Username
Password
LAN IP
DHCP Range
Press and hold the RESET button for more than 5 seconds with a paper clip or a
pencil tip to reboot the unit and restore the factory defaults. Changes that you have
previously made to the RV315W settings are lost.
These ports provide a LAN connection to network devices,
such as PCs, print servers, or switches.
The RESET button has two functions:
• Reboot: Press the RESET button for at least 1, but no
more than 5 seconds with a paper clip or a pencil tip
to reboot the unit.
• Restore to Factory Defaults: Press and hold the
RESET button for more than 5 seconds to reboot the
unit and restore to factory defaults. Changes that you
have previously made to the RV315W settings are
lost.
The POWER port is where you connect the supplied power
adapter (12 V/3 A).
Powers the unit on or off.
Default Value
cisco
cisco
192. 1 68. 1 . 1
192. 1 68. 1 . 1 00 to 192. 1 68. 1 .200
1
9