Group Accounts; Local Accounts Page - HP Integrity BL870c Operation Manual

NOTE: Depending on your server, this page might look slightly different.
Figure 8-22 Local Accounts Page
NOTE:
The BL c-Class tab is available only on HP Integrity server blades.
There are two default users:
1. Admin: The Admin user has all five rights (console access, power control, MP configuration,
user administration, virtual media).
2. Oper: The Oper user has the login and console access rights by default.
Table 8-23 lists the fields and descriptions.
Table 8-23 Local Accounts Page Description
Field
Select User
Add/Edit
Delete

Group Accounts

The Group Accounts page
specifying the distinguished name of the group and privileges that should be granted to users
who are members of that group.
You must configure group administration information when the directory is enabled with the
default schema.
140 Using iLO 2
Select an existing user from the list of user names to edit or delete that account or select
New User to add a new user.
Click this button after selecting the user account to modify or to add a new account.
For an existing account, you can modify any of the parameters shown, provided the
user has sufficient privileges. By default, a new user is granted the login and console
access right, their operating mode is set to multiple logins and the user is enabled.
Click this button after selecting the user account to delete. If you do not have the user
administration access right, this button is disabled.
(Figure 8-23) enables you to enter one or more directory groups by
Description