Access Rights For Cell-Based Servers; Commands And Associated Access Right - HP Integrity BL870c Operation Manual

Table 7-2 Access Rights for Cell-Based Servers
Access Right
Login Access
Console Access
Server Power Access
MP Configuration Access
User Administration
Access
Virtual Media Access
Table 7-3 lists the iLO 2 commands and the access right associated with each command.
Table 7-3 Commands and Associated Access Right
Command
BO
RR
RS
TC
CC
CP
DATE
DC
DE
DF
DI
DU
HE
ID
IF
IT
LC
80 Configuring DHCP, DNS, LDAP, and Schema-Free LDAP
Single Letter
Representation
L
C
P
M
U
V
Location
Command Menu Server Power Access
Server Power Access
Server Power Access
Server Power Access
MP Configuration Access
Login Access
MP Configuration Access
MP Configuration Access
Login Access
Login Access
MP Configuration Access
Login Access
Login Access
MP Configuration Access
Login Access
MP Configuration Access
MP Configuration Access
Description
This right is required to perform any operation on iLO 2.
A user must have this right for each partition to which access is
granted.
With this right, a user can run Status or Read-only commands.
This right enables a user to access the console of the specified
partition (such as the host OS).
Console Access Level CO Command.
This right enables a user to power on and off or reset the host
platform.
This right enables a user to configure iLO 2 parameters.
Some examples of commands that are used to configure MP
parameters are CA, CC, CG, DATE, DC, DI, ID, IT,
LC, LDAP, MFG, PARPERM, and RL.
This right enables a user to create, modify, and delete local iLO
2 user accounts and set the default partition for a session.
Examples of an MP Local User Administration Level Command
are SO and PD.
This right enables a user to control and access vMedia for the
selected partition.
Access Right