Exiting The Sm Clp Interface; Changing The Ilo 2 Default Interface To Sm Clp - HP Integrity BL870c Operation Manual

2. At the MP Main Menu, enter SMCLP to access SM CLP. The screen displays the SM CLP
hpiLO-> prompt.
MP MAIN MENU:
SMCLP: Server Management Command Line Protocol
[hqgstlv7] MP>
[hqgstlv7] MP> SMCLP
HP SMASH SM CLP interface.
Type "help" to display all supported commands.
Type "show" to display information about the current target.
Type "start /map1/textredirectsap1" to switch to iLO Main Menu interface.
=== SMCLP v1.0.0 Hewlett-Packard Company ===
</> hpiLO->

Exiting the SM CLP Interface

To terminate an SM CLP session and disconnect from iLO 2, use the exit command. To switch
from SM CLP to the MP Main Menu interface, use the start /map1/textredirectsap1
command.

Changing the iLO 2 Default Interface to SM CLP

The iLO 2 has a configurable setting that enables you to select your default interface, MP Main
Menu or SM CLP.
To change the default interface from MP Main Menu to SM CLP, follow these steps:
1. At the MP Main Menu, enter CM.
2. From the CM prompt, enter SA to modify iLO 2 access configuration.
3. Use the following example as you follow the prompts on the screen to change the default
interface from MP Main Menu to SM CLP.
MP:CM>SA
This command allows you to modify MP access configuration.
Current Set Access Configuration:
R - Remote
T - Telnet
H - SSH
W - Web SSL
I - IPMI over LAN : Enabled
C - Command Mode
Enter parameter(s) to change, A to modify All, or [Q] to Quit: c
c
For each parameter, enter:
New value, or
<CR> to retain the current value, or
DEFAULT to set the default value, or
Q to Quit
Default Command Mode Configuration:
Current -> M - MP Menu (default)
CO: Console
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Log
SL: Show Event Logs
HE: Main Help Menu
X: Exit Connection
: OS SESSION
: Enabled
: Disabled
: Enabled
: MP Menu
S - SM CLP
SMASH Server Management Command Line Protocol 153