Telnet Examples; Ssh; Target: Map1/Sshsvc1; Ssh Examples - HP Integrity BL870c Operation Manual

Telnet Examples

The following examples show specific Telnet commands.
Enable Telnet Service
</>-> start /map1/telnetsvc1
Disable Telnet Service
</>-> stop /map1/telnetsvc1

SSH

This section describes targets, their properties, and supported verbs necessary to enable or disable
SSH access to iLO 2.

Target: map1/sshsvc1

The sshsvc1 target represents the SSH service provided by map1.
Table 8-44 shows sshsvc1 target properties.
Table 8-44 sshsvc1 Properties
Property Name
EnabledState
Protocol
Verbs
start Enables iLO 2 SSH service.
stop Disables iLO 2 SSH service.
show Displays information.
help Displays context-sensitive help.

SSH Examples

The following examples show specific SSH commands.
Enable SSH Service
</>-> start /map1/sshsvc1
Disable SSH Service
</>-> stop /map1/sshsvc1

Network Configuration

Network commands enable you to display or modify network settings.

SM CLP Network Targets, Properties, and Verbs

This section describes targets, target properties, and supported verbs necessary to implement
the iLO 2 network configuration through SM CLP.

Target: map1/enetport1

The enetport1 target represents capabilities and management of the iLO 2 MP Ethernet port.
Table 8-45 shows enetport1 target information.
166 Using iLO 2
Description
Shows whether SSH service is enabled or
disabled.
The protocol this service provides.
Access and Values
Read-only
The following are valid values:
Enabled, Disabled
Read-only
Set to SSH.