Blade: Display Blade Parameters; Ca: Configure Asynchronous Local Serial Port - HP Integrity BL870c Operation Manual

BLADE: Display BLADE parameters

NOTE:
This command is available only on a server blade.
Command access level: Login access
BLADE facilitates the cabling and initial installation of HP Integrity server blades. It also provides
a quick view of the enclosure status. You must have configuration access right to turn the enclosure
locator UID LED on or off.
Onboard Administrator Configuration
OA IP Address
OA MAC Address
Server Blade Configuration
Rack Name
Rack UID
Bay Number
Enclosure Information
Enclosure Name
Health Indicates one of three states of health of this enclosure.
OK
Degraded
Critical
Command line usage and scripting:
BLADE [ -nc ]
blade -?
Example of the BLADE Command With Output
[gstlhpg1] MP:CM> blade
BLADE
Onboard Administrator Information:
IP Address
MAC Address
Server Blade Information:
Rack name
Rack UID
Bay Number
Enclosure Information:
Enclosure name
Health
-> Command successful.
[gstlhpg1] MP:CM>

CA: Configure asynchronous local serial port

Command access level: MP configuration access
94 Using iLO 2
IP address of the OA.
MAC address of the OA.
Logically groups together enclosures in a rack. The rack name is shared with
the other enclosures in the rack.
Rack unique identifier.
The blade enclosure can support up to eight HP Integrity server blades. When
viewed from the rack front, the bays are numbered from left to right, from 1 to
8. The bay number is used to locate and identify a blade.
Logically groups together the server blades installed in the same enclosure.
The enclosure name is shared with the other server blades in the enclosure.
Normal operation, any issues have been acknowledged.
Typically loss of redundancy or partial failure of a component.
Failure with loss or imminent loss of system function.
: 192.0.2.1
: 0x00xxxxxexxbb
: RACK
: 000z00xx0000
: 3
: encl
: OK