Status Summary > Fw Revisions; Fw Revisions Page; Active Users; Fw Revisions - HP Integrity BL870c Operation Manual

Table 8-1 1 Active Users Page Description
Field
Access Type
User Login
IP Address
Authorized
Rights
Mode
Disconnect
Status Summary > FW Revisions
The FW Revisions page displays current revisions of the system firmware.
NOTE: Depending on your server, this page might look slightly different.
Figure 8-4 FW Revisions Page
Table 8-12 lists the fields and descriptions.
Table 8-12 FW Revisions Page Descriptions
Field
iLO MP
BMC
EFI
112 Using iLO 2
Multiple access methods are available: Serial, Telnet, SSH, SSL web or IPMI over LAN.
IPMI, vMedia, and IRC/vKVM users are not listed in web GUI sessions.
The user currently logged in through a particular access type.
The IP address of the active user.
The type of authentication: LDAP directory user authentication (LDAP) or locally
stored iLO 2 user accounts (local).
Rights control the iLO 2 functions a user can perform. There are five user access rights:
console access, MP configuration, power control, virtual media, and user administration.
A user can be configured to have some, none, or all the access rights.
Current iLO 2 mode that the user is in. TUI modes are: MA, MP Main Menu; CM, MP
Command menu; CO, console; LIVE, Live event viewer; VFP, VFP mode.
Enables a user with sufficient privileges to disconnect users of a certain access type.
iLO Management Processor firmware version
Base Management Controller firmware version
Extensible Firmware Interface firmware version
Description
Description