Switching Between The System Console And The Sm Clp; Starting A System Console Session; Determining The Session Termination Character Sequence For The System Console; Exiting The System Console Session And Returning To Sm Clp - HP Integrity BL870c Operation Manual

Table 8-39 /system1/consoles1/textredirectsap1 Properties
Property Name
EnabledState
SessionTerminateSequence
Description
Name
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.
start Switch to system text console.

Switching Between the System Console and the SM CLP

The following examples show commands used to switch between the system console and the
SM CLP.

Starting a System Console Session

To start a system console session, enter the following command:
</>hpiLO->start /system1/consoles1/textredirectsap1

Determining the Session Termination Character Sequence for the System Console

To determine the session termination character sequence for the system console, enter the
following command:
</> hpiLO-> show -d properties=SessionTerminateSequence
/system1/consoles1/testredirectsap1
status 0
status_tag=COMMAND COMPLETED
/system1/consoles1/testredirectsap1
Properties
SessionTerminateSequence=Esc (

Exiting the System Console Session and Returning to SM CLP

To exit the system console session and return to SM CLP, enter Esc + ( at the system text
console.

Entering the MP Main Menu Interface From SM CLP

To enter the MP Main Menu from SM CLP, enter the following command: </>hpiLO->start
/map1/textredirectsap1

Exiting the MP Main Menu Session and Returning to SM CLP

To exit the MP Main Menu interface and return to the SM CLP session, enter SMCLP
162 Using iLO 2
Description
Shows if the test redirection is
enabled.
A string sequence used for
terminating text redirection session
and returning to SM CLP.
Description of this text redirection
service access point.
Uniquely identifies this access point.
Access and Values
Read-only
Set to Enabled.
Read-only
Set to Esc.
Enter Esc at the system console to return to the
SM CLP interface.
Read-only
Set to System Test Console Interface.
Read-only
Set to System Test Console.