Target: Map1/Enetport1/Lanendpt1/Ipendpt1/Gateway1; Target: Map1/Dnsserver1, Map1/Dnsserver2, Map1/Dnsserver3; Target: Map1/Settings1/Dnssettings1; Dnsendpt1 Properties - HP Integrity BL870c Operation Manual

Table 8-49 dnsendpt1 Properties
Property Name
EnabledState
Hostname
OtherTypeDescription
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.

Target: map1/enetport1/lanendpt1/ipendpt1/gateway1

The gateway1 target represents the gateway server.
Table 8-50 shows gateway1 target properties.
Table 8-50 gateway1 Properties
Property Name
AccessInfo
AccessContext

Target: map1/dnsserver1, map1/dnsserver2, map1/dnsserver3

The dnsserver1, dnsserver2, and dnsserver3 targets represent the iLO 2 primary,
secondary, and tertiary DNS servers respectively.
Table 8-51 shows dnsserver1, dnsserver2, and dnsserver3 target properties
Table 8-51 dnsserver1, dnsserver2, dnsserver3 Properties
Property Name
AccessInfo
AccessContext
Verbs
show Displays information.
help Displays context-sensitive help.
set Sets a property to a specific value.

Target: map1/settings1/dnssettings1

The dnssettings1 target contains iLO 2 DNS settings.
Description
Represents the state of iLO 2 DNS.
Represents the host name currently
assigned to iLO 2.
Textual description of this protocol
endpoint.
Description
Represents the IP address of the gateway
server.
Represents access context (description)
of this access point.
Description
Represents the IP address of the DNS
server.
Represents access context (description)
of this access point.
SMASH Server Management Command Line Protocol
Access and Values
Read only
The following are valid values:
Enabled: The iLO 2 DNS client is enabled.
Disabled: The iLO 2 DNS client is disabled.
Read-only
iLO 2 current host name.
Read-only
Set to DNS.
Access and Values
Read/write
The value of the property must be expressed
in dotted decimal notation.
Read-only
Set to default gateway.
Access and Values
Read/write
The value of the property must be expressed
in dotted decimal notation.
Read-only
Set to DNS server.
169