Events - HP Integrity BL870c Operation Manual

Events communicate system information from the source of the event to other parts of the system,
then to you. Events are produced by intelligent hardware modules, the operating system, and
system firmware. Events funnel into the BMC from different sources throughout the server. iLO
2 polls the BMC for new events and stores them in nonvolatile memory.
SL also displays the contents of the iLO 2 Event Log. The records the following events:
• iLO 2 MP login and logout attempts
• Command logging for specific commands
• All entries in the existing history log with more detail
Each time a user logs in or out of iLO 2, an event is logged. In the event of a login failure, an
event is logged if the number of continuous login failure attempts equals the password fault
value.
Command logging is run for the following commands: BP, CA, DC, DI, DNS, FW, ID,
IT, LC, LDAP, LM, PC, PM, PR, RB, RS, SA, SNMP, SO, TC, UC
Events are listed as follows:
SEL: System Error Log
FPL: Forward Progress Log
Boot Log
Previous Boot Log
Reading the SEL is the only way to turn off the attention LED (flashing yellow light).
Table 8-3 lists the events and actions used to navigate within the logs.
Table 8-3 Events
Event
+
-
Enter (<CR>)
D
F
L
J
H
K
T
A
U
Q
?
Ctrl-B
Integrity iLO 2 Event Log navigation provides additional filtering options as shown in
86 Using iLO 2
High-attention events and errors
All events
All events between start of boot and boot complete
The events from the previous boot
Displays the next block (forward in time)
Displays the previous block (backward in time)
Continues to the next or previous block
Dumps the entire log for capture or analysis
Displays the first entry
Displays the last entry
Jumps to entry number
Displays the mode configuration (hex)
Displays the mode configuration (keyword)
Displays the view mode configuration (text)
Displays the alert level filter options
Displays the alert level unfiltered
Quits and returns to the Event Log Viewer Menu
Displays the Help Menu
Exits and returns to the MP Main Menu
Action
Table 8-4.