Installing Snap-Ins; Extending Schema - HP Integrity BL870c Operation Manual

To ensure you have the correct version of JRE installed on your system, follow these steps:
1. To determine the Java version, execute the following command:
# java -version
The Java version installed on your system is displayed.
2. If Java is not installed on your system, execute the following command:
# rpm
NOTE:
3. Execute the following command if:
• Java is installed and the version is older than 1.4.2.
• You want to upgrade the Java version and uninstall an older version.
# rpm
4. Add the entry /usr/java/j2re1.4.2_04/bin to the .bash_profile file.

Installing Snap-Ins

Create the HP directory under the /usr/ConsoleOne/snapins/ directory, and copy the two
.jar snap-in files, hpqLOMv100.jar and hpqMgmtCore.jar, to the HP directory. When the
hpdsse.sh file is executed, the HP directory is automatically created and the two .jar files
are copied to it.
NOTE:
The hpdsse.sh file is obtained when the Schema.tar tar file is extracted. This process
is explained in the Schema Extension section. You can download schema extensions from the
HP website at:
index.html
Select Software and Drivers, and the operating system for the schema extension you want to
install.

Extending Schema

To obtain the hpdsse.sh file, follow these steps:
1. Download the tar file to the Linux system where eDirectory is installed.
2. Extract the tar file to obtain the hpdsse.sh file by executing the following command:
# tar
3. Run this file by executing the following command:
# ./hpdsse.sh
This command displays instructions. As indicated in the instructions to extend the schema,
provide the server name, admin DN, and admin password as command line arguments.
4. To see the results, view the schema.log file, (created after the schema extension is complete).
The log file lists the created classes and attributes. In addition, it shows the result as
"Succeeded". If the objects already exist, the message "Already Exists" appears in the log
file.
The Already Exists message appears only when you try to run the same .sh file after the schema
extension is complete.
The SSL port (636) is used during the schema extension. You can verify this by running the
netstat –nt grep :636 command while the hpdsse.sh file is being executed.
202 Installing and Configuring Directory Services
iv j2re-1_4_2_04-linux-i586.rpm
You can download this rpm file from the Java website.
Uv j2re-1_4_2_04-linux-i586.rpm
http://h18013.www1.hp.com/products/servers/management/directorysupp/
xvf Schema. tar