Table of Contents
Advertisement
6.
Disable DHCP:
a. Click Network Options.
b. Select OFF in the DHCP Enable menu.
The IP Address, Subnet Mask, and Gateway IP Address boxes become editable. When DHCP Enable is set to
ON, you cannot edit these values.
7.
Enter values in the IP Address, Subnet Mask, and Gateway IP Address boxes.
8.
To save the changes and exit, press F12.
The iLO 5 Configuration Utility prompts you to confirm that you want to save the pending configuration changes.
9.
To save and exit, click Yes - Save Changes.
The iLO 5 Configuration Utility notifies you that iLO must be reset in order for the changes to take effect.
10. Click OK.
iLO resets, and the iLO session is automatically ended. You can reconnect in approximately 30 seconds.
11. Resume the normal boot process:
a. Start the iLO remote console.
The iLO 5 Configuration Utility is still open from the previous session.
b. Press ESC several times to navigate to the System Configuration page.
c. To exit the System Utilities and resume the normal boot process, click Exit and resume system boot.
Managing local user accounts with the iLO 5 Configuration Utility
Adding user accounts (iLO 5 Configuration Utility)
Procedure
1.
(Optional) If you access the server remotely, start an iLO remote console session.
2.
Restart or power on the server.
3.
Press F9 in the server POST screen.
The UEFI System Utilities start.
4.
Click System Configuration, click iLO 5 Configuration Utility, click User Management, and then click Add User.
5.
Select the privileges for the new user.
To assign a privilege, select YES in the menu next to the privilege name. To remove a privilege, select NO.
The Login privilege is assigned to every user by default, so it is not listed in the iLO 5 Configuration Utility.
You cannot assign the Recovery Set privilege through the iLO 5 Configuration Utility, so it is not available in the list.
6.
Enter the user name and login name in the New User Name and Login Name boxes.
7.
Enter the password.
a. Move the cursor to the Password box, and then press Enter.
Set up HPE iLO on the HPE ProLiant e910t Server Blade
25
Advertisement
Table of Contents
