So: Security Option Help; Ss: System Status - HP Integrity BL870c Operation Manual

7. To configure the community string to secure the access to the MIB objects, enter C. The
default is public.
Command line usage and scripting
SNMP [ -status <e|d> ] [ -community [ <text> ] ] [ -nc ]
-?
Command line usage and scripting for server blades:
SA [ -status <e|d> ] [ -community [ <text> ] ] [ -traps <e|d> ]
[ -1dest <ipaddr> ] [ -2dest <ipaddr> ] [ -3dest <ipaddr> ]
[ -4dest <ipaddr> ] [ -nc ]
-?
See also: ID

SO: Security option help

Command access level: MP configuration access
SO modifies the security option of iLO 2 (login timeouts, password faulty, SSL certificate
generation, SSH keys).
The following are SO command parameters:
• Login timeout: Zero to five minutes. This is the maximum time allowed to enter login name
and password after the connection is established. The connection is interrupted when the
timeout value is reached. The local console restarts the login; for all other terminal types,
the connection is closed. A timeout value of 0 means there is no timeout set for the login.
The login timeout and the timeout value is effective on all ports including the local port.
However, the local port cannot be disconnected like other ports on login timeout. For example,
if a local port user sits at the MP Login: prompt, nothing happens even if a timeout occurs.
But, if a local port user enters a login name, sits at the MP Password: prompt, and if a
timeout occurs at this stage, this login is cancelled and the MP Login: prompt reappears.
• Number of password faults allowed: 1 to 10. This parameter defines the number of times a
user can attempt to log in to a console before being rejected and having its connection closed.
• SSL certificate: Enables the generation of SSL certificates.
• SSH keys generation: Enables SSH keys authorization.
• iLO 2 reset: Enables an iLO 2 reset through IPMI from BMC, system, or IPMI over LAN.
• iLO 2 password reset: Enables iLO 2 password reset through IPMI from BMC, system, or
IPMI over LAN.
Command line usage and scripting:
SO [ { -options [ -login <n> ] [ -number <n> ] [ -fwpci <e|d> ]
| { -ss1 [ -name <text> ] [ -organization <text>] [ -unit <text> ]
| { -ssh } ] [-nc ]
-?

SS: System Status

Command access level: Login access
SS displays the status of the system processors and which processor is the monarch.
The iLO 2 learns the system configuration through the events it receives from the system. There
is usually a delay between any processor configuration change and what is displayed by this
command. For the most up-to-date processor configuration information, use the EFI or BCH
prompt.
Command line usage and scripting:
[ -reset <e|d> ] [ -pwdreset <e|d> ] }
[ country <text> ] [ -region <text> ] [ -locality <text> ]
[ -email <text> ] }
Text User Interface 105