Sm Clp Network Command Examples; Dnssettings1 Properties - HP Integrity BL870c Operation Manual

Table 8-52 shows dnssettings1 target properties.
Table 8-52 dnssettings1 Properties
Property Name
DNSServerAddress
DomainName
RegisterThisConnections Address
RequestedHostName
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.
set Sets a property to a specific value.

SM CLP Network Command Examples

The following examples list specific network commands.
Determine the iLO 2 MP MAC Address
</>hpiLO-> show -d properties=macaddress /map1/enetport1/lanendpt1
or
</>hpiLO-> show -d properties=permanentaddress /map1/enetport1/
Determine current IP Address
</>hpiLO-> show -d properties=ipv4address /map1/enetport1/lanendpt1/ipendpt1
Determine Subnet Mask
</>hpiLO-> show -d properties=subnetmask /map1/enetport1/lanendpt1/ipendpt1
Set IP Address and Subnet Mask
To modify a Static IP Address and Subnet Mask, set IPv4Address and SubnetMask properties
of the ipendpt1 target:
</>hpiLO-> set /map1/enetport1/lanendpt1/ipendpt1
ipv4address=192.0.2.1 subnetmask=255.255.255.0
Determine Gateway Address
</>hpiLO-> show -d properties=accessinfo
/map1/enetport1/lanendpt1/ipendpt1/gateway1
Set Gateway Address
170 Using iLO 2
Description
Contains the IP addresses of the
primary, secondary, and tertiary
DNS servers.
iLO 2 domain name.
Indicates whether iLO 2 registers
with the DDNS server.
iLO 2 host name.
Access and Values
Read/write
This is an array property.
The value of each element of this
property must be expressed in
dotted decimal notation. The
elements of the property are
separated by commas
(DNSServerAddressess=192.0.2.1,
192.0.2.2, 192.0.2.3 means that the
IP addresses of the primary,
secondary and tertiary DNS servers
are set to 192.0.2.1, 192.0.2.2,
192.0.2.3 respectively).
Read/write
Read/write.
The following are valid values:
Yes: register with DDNS server.
No: do not register with DDNS
server.
Read/write.