Using Ilo 2; Text User Interface; Mp Command Interfaces - HP Integrity BL870c Operation Manual

Hp integrity ilo 2 operations guide, eleventh edition
Hide thumbs Also See for Integrity BL870c:
Table of Contents

Advertisement

8 Using iLO 2

This chapter provides information on the different interfaces you can use to interact with iLO 2
such as text user interface, web GUI, and SMASH SM CLP.

Text User Interface

This section provides information on the text user interface commands you can run in iLO 2.
NOTE:
HP Integrity server blades do not have fans or power supplies. Therefore, their response
to certain commands are different than a rackmount server.

MP Command Interfaces

Table 8-1
lists and describes the available MP command interfaces.
Table 8-1 MP Command Interfaces
MP Command Interface
MP Main Menu
Command Menu
SMASH SM CLP
Figure 8-1
displays the MP command interface options.
Description
The MP Main Menu appears when you first access the iLO 2 MP. The MP Main Menu
supports the basic MP commands for server control and the iLO 2 MP configuration,
such as setting up the iLO 2 MP LAN, retrieving events, resetting and powering on control
of the server, switching to the console, and so on. You can enter the MP Main Menu
commands at the MP> prompt.
The Command menu provides a set of commands that help monitor and manage the
server. It switches the console terminal from the MP Main Menu to command interface
mode. You can access commands that are not displayed in the MP Main Menu by entering
CM at the MP Main Menu and entering HE LI at the MP:CM> prompt to get a list of the
available commands.
The Systems Management Architecture for Server Hardware (SMASH), Server
Management Command Line Protocol (SM CLP) initiative is an effort within the
Distributed Management Task Force (DMTF) to standardize commands for servers. The
SMASH SM CLP specifies common command line syntax and message protocol semantics
for server management.
NOTE:
SMASH SM CLP commands are only available for entry class servers.
For information on using SMASH SM CLP scripting commands, see
Server Management Command Line Protocol" (page
Section : "SMASH
152).
Text User Interface
83

Advertisement

Table of Contents
loading

Table of Contents