Command Verbs; Supported Command Verbs - HP Integrity BL870c Operation Manual

<options>
<target>
<properties>

Command Verbs

Command verbs select a management action for target.
The command verbs listed in
categories:
Retrieve Information
Configure a target
Change target state
Table 8-33 lists the supported command verbs.
Table 8-33 Supported Command Verbs
Command
cd
create
delete
exit
help
load
reset
set
show
start
stop
version
The following verbs are available for execution from any target:
• show
• help
• cd
Selections that affect the action, behavior, or output of the verb.
The implicitly or explicitly-identified managed element the command is
directed to.
Attributes of the target relative to the command execution.
Table 8-33
cd, help, show, version
create, delete, load, set
exit, reset, start, stop
Changes the current default target.
The root of the CLP target namespace is /, and this is the starting point for a CLP system. By
changing the current default target by running cd <some target>, you can shorten commands.
For example, to find the current MP firmware version, run the command show
/map1/swinventory1/swid1. However, if you run the cd /map1/swinventory1/swid1
command, the show command displays the information.
Creates a new instance of an object.
Deletes an instance of a target object.
Terminates the SM CLP session.
Displays context-sensitive help.
help displays general help and all supported commands.
help <some verb> displays help for the specified verb.
help <some target>displays help for the specified target.
help <some property> displays help for the specified property.
Moves a binary image to iLO 2 from a URI.
Causes a target to cycle from enabled to disabled and back to enabled.
Sets a property to a specific value.
Displays information about managed elements (targets, their supported properties and verbs).
You can also run the show command with an explicit or implicit target. For more information on
implicit and explicit targets, see
"Command Targets" (page 156)
.
Causes a targeted object to change its state to a higher level.
Causes a targeted object to change its state to a lower level.
Queries the version of the SM CLP implementation.
consist of several reserved words in the following
Action
"System1 Target" (page 158),
SMASH Server Management Command Line Protocol
"Map1 (iLO 2) Target" (page 160),
155