Directory Services For Edirectory; Installing And Initializing Snap-In For Edirectory; Lights-Out Management Tab; Lights-Out Management Rights - HP Integrity BL870c Operation Manual

Figure 9-13 Lights-Out Management Tab
Table 9-1 lists the available Lights-Out Management rights.
Table 9-1 Lights-Out Management Rights
MP Rights
Login
Remote Console
Virtual Media
Server Reset
and Power
Administer
Local User
Accounts
Administer
Local Device
Settings

Directory Services for eDirectory

The following sections provide installation prerequisites, preparation, and a working example
of directory services for eDirectory.
NOTE:
Schema-Free LDAP is not supported with eDirectory.

Installing and Initializing Snap-In for eDirectory

For instructions on using the snap-in installation application, see
Snap-Ins for Active Directory" (page
194 Installing and Configuring Directory Services
This option controls whether users can log in to the associated devices and execute Status or
Read-only commands (view event logs and console logs, check system status, power status, and
so on) but not execute any commands that would alter the state of iLO 2 or the system.
This option enables users to access the system console (the host OS).
This option enables users to connect devices through the network such as CD, DVD, and network
drives as virtual devices.
This option enables users to execute iLO 2 power operations to remotely power on, power off, or
reset the host platform, as well as configure the system's power restore policy.
This option enables users to administer local iLO 2 user accounts.
This option enables users to configure all iLO 2 settings, as well as reboot LO 2.
Description
186).
"Installing and Initializing