Ldap: Schema-Free Ldap; Lm: License Management; Loc: Locator Uid Led Configuration; Ls: Lan Status - HP Integrity BL870c Operation Manual

LDAP: Schema-Free LDAP

Schema-Free LDAP enables you to use directory authentication for logging in to iLO 2 without
having to do any schema extension on the directory server or snap-in installation on the client.
For information on schema-free LDAP, see

LM: License management

Command access level: MP configuration access
LM displays your current license status. Use it to enter a license key to enable the Advanced Pack
license features.
Command line usage and scripting:
LM [ -key <license key> ] [ -nc ]
-?

LOC: Locator UID LED configuration

Command access level: MP configuration access
LOC displays the current status of the locator UID LED and enables you to turn the locator UID
LED on or off.
In HP Integrity server blades, this command also enables you to turn the enclosure locator UID
LED on or off. The UID LED physically identifies the blade in a data center environment. It emits
a blue light when turned on. It does not have an associated button. You can control the UID LED
from the BMC only.
Command line usage and scripting:
LOC [ -on | -off
-?
Server blade usage
LOC [ -server <on | off> ] [-enclosure <on | -off>]
-?

LS: LAN status

Command access level: Login access
LS displays all parameters and the current status of the iLO 2 MP LAN connections. The LAN
parameters are not modified by this command.
Command line usage and scripting:
LS [ -nc ]
-?
See also: DNS, LC, SA

PC: Power control access

Command access level: Power control access
PC enables control of the power management module. It provides the following options for
remote control of system power:
ON
OFF
"Configuring Schema-Free LDAP" (page
[ -nc ] ]
Turns the system power on. This command has no affect if the power
is already on.
Turns the system power off. This command is equivalent to turning
the system power off at the front panel switch. There is no signal sent
to the OS to shut the software down before power is turned off. To
turn the system off gracefully, ensure that the OS is shut down before
running this command.
76).
[ -nc ]
Text User Interface 101