HP Integrity BL870c Operation Manual page 175

2. Using the Telnet/SSH connection to the OA.
NOTE:
While in the OA, you will not be entering the SM CLP vMedia commands directly
in MP. Instead, you will issue the commands from the Telnet/SSH connection of the OA to
connect or disconnect vMedia.
• Enter the following commands to either connect or disconnect vMedia:
set server dvd connect <slot #> (or all to connect for all blades)
set server dvd disconnect <slot #> (or all to disconnect for all blades)
3. Using the OA GUI, navigate to Enclosure Information/Enclosure Settings/DVD Drive.
The OA web GUI interface provides an easy-to-navigate graphical interface. Select a specific
action for vMedia, such as inserting a disk, connecting, and so on.
Known Issues
• Only DVD/CD is supported at this time.
• Floppy/USB Key is currently not supported.
• Only one device is supported at a time with scriptable vMedia (either DVD/CD or
Floppy/Key).
• Scriptable vMedia cannot connect while another vMedia Applet is connected and vice versa.
• Apache server cannot support large ISO images (greater than 2 GB).
• Scriptable vMedia does not currently have fully supported DNS. As a result, it does not
support using the hostname in the CLI. Instead you must specify the IP address of the Apache
server while specifying the image path in the command line.
SMASH Server Management Command Line Protocol 175